Abstract: In this era of mass manufacturing MRR (material removal rate) is of prime concern even in manufacturing using CNC machines. The main objective of today’s modern manufacturing industries is to produce low cost and high quality product in short time. In order to improve the quality and to reduce the cost material removal rate should be optimum. In machining accurate dimensions is desired but with good product quality. The experimental study aims to investigate MRR and surface roughness as quality targets by taking feed, depth of cut & speed into consideration for turning of MONEL 400 employing Taguchi method. An optimal parameter combination of the turning operation was obtained via Taguchi method. The result of this analysis identifies the optimal values of process parameters for effective and efficient machining. The result indicates that the determined optimal combination of machining parameters improved the performance of the machining process. The predicted results are found to be closer to experimental results.
Keywords: Nickel Alloy, Monel-400, MRR, Surface roughness, Optimization.
Title: Analysis of quality characteristics on turning of Nickel based super alloy-Monel400
Author: Adhichelvan Balasubramanian
International Journal of Mechanical and Industrial Technology
ISSN 2348-7593 (Online)
Research Publish Journals
