Abstract: Formation of beam used to access all amplitude and phase of required signals. Current paper describes design and simulation for reduced size of Microstrip patch antenna with parallel power divider operating at 2.4 GHz. Every Wireless LAN Application always demands for increased bandwidth and better quality of service. Because of much more advantages such as less cost, easy fabrication, versatile and flexible, Microstrip patch antennas are widely used. The practical operation of this microstrip patch antenna has been simulated on 4×1 microstrip patch antenna with consists of Power Divider. Results from simulation are observed by Ansoft HFSS version13 software in terms of Return loss, VSWR, radiation and Beam patterns. Microstrip patch antenna with Power Divider has been fabricated on FR4/Rogers PCB. Simulated and measured results show good performance and analysis. The proposed Microstrip patch antenna will be connected by 50 Ω Microstrip feed line. Phased antenna array may be to use a switched radiation pattern or to scan Beam of antenna rapidly in angle of azimuth or elevation. Patch antenna arrays are used in mobile communications.
Keywords: Microstrip patch antenna, Phased antenna array, Mobile communication, 50 Ω feed line.
Title: Design and Performance Analysis of Corporate Feed Antenna Array for WLAN Application at 2.4 GHz
Author: Prajakta Uday Chavan, Dr. Mousami V. Munot
International Journal of Electrical and Electronics Research
ISSN 2348-6988 (online)
Research Publish Journals
