Experimental Analysis Of Mechanical Properties Of Al6063 And SIC Composite

Manoj Kumar Yadav, Bijender Saini, Ashu Yadav

Abstract: Today's most of materials are available in market but without composite they have low mechanical properties.  For good mechanical properties composite are very necessary. We know that increasing the use of aluminum alloy in aerospace, automobile and Infrastructure industries.  But due to low properties aluminum alloy not directly use some material reinforce. The presents study results of experimental investigation on mechanical behavior of silicon carbide particle reinforced aluminum matrix. The influence of reinforced ratio of 5%, 7%, and 9% of silicon carbide particles on mechanical behavior was examined. The effect of different weight percentage of silicon carbide in composite on Tensile strength, Hardness, Microstructure was studied. It was observed that the Hardness & Tensile strength of the composites increased with increasing reinforcement element addition in it. The distribution of silicon carbide particles was uniform in aluminum.

Keywords: Silicon carbide (SiC), Metal matrix composite (MMC), Mechanical Properties, Casting.

Title: Experimental Analysis Of Mechanical Properties Of Al6063 And SIC Composite

Author: Manoj Kumar Yadav, Bijender Saini, Ashu Yadav

International Journal of Mechanical and Industrial Technology

ISSN 2348-7593 (Online)

Research Publish Journals

Vol. 3, Issue 1, April 2015 - September 2015

Citation
Share : Facebook Twitter Linked In

Citation
Experimental Analysis Of Mechanical Properties Of Al6063 And SIC Composite by Manoj Kumar Yadav, Bijender Saini, Ashu Yadav