Abstract: Aim of our work is to monitor the human body temperature, blood pressure (BP), Pulse Rate ,GSR, Glucose, Body position, ECG. The human body temperature, BP, Pulse Rate and ECG are detected in the working environment. This can be sensed by using respective sensors. The sensed information is send to the microcontroller through signal conditioning circuit in the patient unit. A desired amount of sensor value is set and if it is exceeded preliminary steps should be taken by the indicating by buzzer. The sensor information will be transmitted from the patient unit to the main controller unit with the help of Zigbee communication system which is connected with the microcontrollers in the both units. The main controller unit will send those sensed data as well as the location of that patient by the help of GPS Module to the observer/doctor. The observer/doctor can receive the SMS sent by GSM module and further decision can be taken. The message is sent to a mobile phone using Global system mobile (GSM) Modem. MAX232 was a driver between microcontroller and modem.
Keywords: microcontroller, blood pressure, sensor, Zigbee, GPS, GSM.
Title: Patient Monitoring System Using Android APP
Author: K. DEEPALAKSHMI, Ms A. SIVASANKARI
International Journal of Computer Science and Information Technology Research
ISSN 2348-1196 (print), ISSN 2348-120X (online)
Research Publish Journals
